Denon DN-474A 2x2-Channel Dual-Impedance Amplifier

Backorder: Available in 5 days (02/04/2024) if ordered today
£449.98 inc VAT

Free Saver Delivery on this item!

The DN-474A 2x2-Channel Dual-Impedance Amplifier is designed for contractor/install market applications which specify installed speaker systems requiring 70V/100V inputs, and has the added flexibility of handling lo-impedance loads (4Ω/8Ω). The amplifier is split so that two channels handle the lo-impedance speakers, while two channels take care of the 70V/100V speaker runs. This very versatile, one rack space amplifier has built-in short circuit protection - and LED indicators for signal present, clipping status and thermal interruption on the front panel. Engineered for the distribution of multiple 70V/100V speaker systems over long cable runs - such as in-ceiling speakers, surface-mount speakers and paging horns, and also for shorter runs to lo-impedance speakers.

Key Features of Denon DN-474A 2x2-Channel Dual-Impedance Amplifier

  • 4-Channel Class-D amplifier
  • 2 X 120 Watts with 70V/100V outputs
  • 2 X 150/90 Watts with 4/8-ohm loads
  • Euroblock inputs and outputs
  • Separate gain controls for each channel
  • Signal, clipping and thermal interruption indicators
  • Short-circuit and open-circuit protection

Specifications

  • Total Harmonic Distortion:
  • Frequency Response: 100 Hz - 15 kHz (0 +/-1 dBv)
  • Signal to Noise Ratio: > 95 dB
  • Channel Separation: > 70 dB
  • Input Sensitivity: 0.9 - 1.1 V (0 +/-1 dBv)
  • Input Impedance: 20 kΩ balanced or 10 kΩ unbalanced

  • Connectors

  • 8 x Euroblock channel outputs - 2 x per channel (70V, 100V, 4Ω, 8Ω)
  • 4 x Euroblock channel inputs (ground, -, +)
  • 1 x IEC IEC AC power inlet
  • Power

  • Connection: IEC
  • Voltage: 100-240 VAC, 50/60 Hz
  • Dimensions (width x depth x height)

  • 19.0"w x 11.1"d x 1.7"h (483 x 281 x 44mm)
  • Weight

  • 10.4 lbs (4.7 kg)
  • Stage Depot - Audio & PA, Amplifiers and Power Amplifiers Suppliers